Description
It is used as plastering topcoat for thermal insulation boards (Expanded polystyrene – EPS and extruded polystyrene – XPS), indoors and outdoors. Easy to apply and ready to use product that provides excellent adhesion. It has high resistance to water and frost and is not affected by temperature changes because of the flexibility given by FIBREX Technology fiber reinforcement. Acryflex Acrylic Plaster provides high stability, does not sag or crack while allowing the surface to breathe. Paint can be applied directly on it.
Surface Preparation
The application surface should be solid and free from adhesion preventive substances such as dust, oil, tar, flaking paint, silicone, curing agents, detergents, etc. Acryflex Acrylic Plaster is applied minimum 12 hours after the application of Acryflex Primer.
Product Preparation
Acryflex Acrylic Plaster is a ready to use product. If necessary dilute with maximum 250 ml of clean water. Mix well with a low-speed mechanical mixer. The mixed product is rested for 5 minutes before application. The diluted mass should be applied within 24 hours.
Application Method
At least 24 hours after the application of Acryflex Primer, a layer of Acryflex Acrylic Plaster of 1-3 mm thickness is applied, depending on the chosen granulometry render. Application must be done with a stainless-steel flat trowel. After approximately 10-30 minutes the surface is smoothed for painting with a plastic trowel. Depending on the weather conditions, it is necessary to wait 1-3 days before painting.
